Current position > Product detail
『Vortex flowmeter dn200』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
What size should be reserved before installing the flowmeter? The reserved size before the installation of the flowmeter varies depending on the type, diameter, and installation requirements. For common pipeline flow meters, taking electromagnetic flow meters as an example, if the diameter is small (such as DN50 and below), the upstream and downstream straight pipe sections generally need to reserve at least 5 times the diameter and 3 times the diameter respectively. At the same time, a certain space should be reserved around the flow meter for easy installation, disassembly, and maintenance. Usually, 200-300mm of space should be reserved on both sides. When the diameter of the vortex flow chamber is between DN50 and DN200, the upstream straight pipe section requires 15-20 times the diameter, and the downstream straight pipe section requires 5-10 times the diameter. The installation location also needs to consider the surrounding environment, avoid strong electromagnetic interference, etc. A certain height space should be reserved above the equipment for maintenance, generally with a reserved height of not less than 500mm. For orifice flow meters, the upstream straight pipe section generally requires 10-15 times the pipe diameter, and the downstream straight pipe section requires about 5 times the pipe diameter. And it is necessary to consider the installation and operation space. According to the actual situation, sufficient space should be reserved around the flowmeter to ensure that the installation tools can be operated smoothly. The actual reserved size needs to be determined based on the specific product manual and the actual installation site conditions. 2. What is the price of a vortex flowmeter? Lets
The price of a vortex flowmeter depends on the specific model, and factors such as different diameters, materials, accessories, and calibration costs will all affect the final price.
. The following is a detailed explanation from the manufacturer on the factors affecting prices:1. The core influencing factor of prices is the caliber of differences, which is one of the key factors affecting prices. For example, the price of a DN50 caliber vortex flowmeter is about 6000 yuan; The price of DN200 caliber is about 10000 yuan. The larger the caliber, the higher the price usually, which needs to be further confirmed based on the model. The installation method of flange connected vortex flowmeter is more than 500 yuan higher than that of clamp connected flowmeter, and the price difference increases with the increase of caliber. For example, the DN100 flange connection may be 800 yuan more expensive than the clamp installation, while the price difference for the DN200 may reach 1200 yuan. If a third-party verification certificate is required for the verification fee, the price will be more than 1000 yuan higher than that of products without certificates, and the verification fee is related to the caliber. For example, DN50 certified products may cost 1200 yuan more, while DN200 may cost 1800 yuan more. Other factors for measuring media: Corrosive media require special materials (such as stainless steel), which are significantly more expensive than ordinary media. Anti vibration selection: High anti vibration models require special design, with a price increase of 10% -20%. Explosion proof grade: Explosion proof products have higher safety requirements, resulting in a 15% -3