How to adjust the flow coefficient of a Walsh mass flowmeter?

『Walsn quality flowmeter manufacturer quotation』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Is the Watson mass flow meter OEM?

Yes. According to the relevant information on Watson, it is known that the Watson mass flowmeter is OEM. The Qing Chao Na Wo Que Xing Sen Zhi Yu Tai flow meter Walsh TS series can be used for real-time measurement of fluid mass flow rate, density, and temperature. It can also calculate the volume flow rate, cumulative mass, cumulative volume, component ratio, and other parameters of the fluid.

2. How to adjust the flow coefficient of a walsn mass flowmeter? Mass flow meters typically use a flow coefficient called the K factor to measure the flow rate of a fluid. The value of the K factor may need to be adjusted according to the usage environment of the flowmeter and the characteristics of the measured fluid. Here are some feasible methods: using calibration equipment: Some flowmeter manufacturers can provide calibration equipment that can calibrate according to the official standard flow rate to determine the value of the K factor. Adjusting based on fluid properties: Taking into account the characteristics of the measured fluid is an important factor. By applying the principles of fluid dynamics, the value of the K factor can be calibrated for different fluid characteristics. Adjust according to the field measured data: in the actual application of the correction, the actual flow can be measured and compared with the reading of the flow master meter, and then adjust the value of K factor to accurately measure the measured flow.

『SILVER Official Website SERVICE』