Biogas flowmeter manufacturer| asthma

『Biogas flowmeter manufacturer』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. What is a biogas flowmeter?

The biogas flow meter adopts the conventional differential pressure target type biogas flow meter principle, ensuring the durability, practicality, and long service life of the biogas flow meter. At the same time, it has the advantages of high measurement accuracy and good stability.. The biogas flowmeter system is suitable for measuring various biogas flow rates. The entire system consists of a flow sensor (target sensor), an intelligent LCD host, temperature and pressure compensation components, and instrument valve components. Biogas flow meters can also be used for measuring various pure pollutants and corrosive media. Parameter caliber: DN15~DN3000mm nominal pressure: 0.6~42MPa operating temperature: -200 ℃~-30 ℃ accuracy: ± 0.2~± 1.5% FS range ratio: 1:8 shell: carbon steel; Stainless steel (or negotiated according to user requirements) power supply method: built-in 3.6VDC lithium battery (changed every two years, without signal output); External supply 24VDC, (with signal output) output signal: 4-20mA two-wire system; Pulse 0~1000HZ; RS232/RS485 (or as agreed upon by the user), protection level: IP65; IP67 explosion-proof mark: intrinsic safety type ExiallCT4; Explosion proof ExdllCT4 execution standard: Q/BET05-06 header display: cumulative flow rate; Instantaneous flow rate; Operating temperature; Operating pressure (only available for temperature and pressure compensation with large brightness); Rod shaped full-scale percentage; Fault self checking connection method: clamp type DN10~DN300, plug-in type DN100~DN3000, flange pipeline type DN10~DN300, flange standard: GB/T series; Chemical (HG) series; Mechanical (JB/T) series; We can also negotiate and produce produ

cts according to customer requirements. The product features include high-quality alloy turbines with higher stability and corrosion resistance, imported high-quality special bearings, long service life, isolation between the measuring chamber and the ventilation chamber, ensuring the safety of the instrument. The flow range is wide (Qmax/Qmin ≥ 20:1), good repeatability, high accuracy (up to 1.0 level), low pressure loss, low starting flow rate, up to 0.6m3/h. The instrument has explosion-proof and protective functions, with explosion-proof marks of Exd Ⅱ BT

6 and Exia Ⅱ CT6, and a protection level of IP65.

2. What is FIQ flow meter

1. FIQ stands for flow indicator with cumulative quantity.

. F represents traffic, I represents indication, and Q represents accumulation.

2、 The measurement principle of a flowmeter is Faradays law of electromagnetic induction. The main components of the sensor are the measuring tube, electrode, excitation coil, iron core, and magnetic yoke housing. It is mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Including strong corrosive liquids such as acid, alkali, and cherry blossom salt. This product is widely used in industries such as petroleum, chemical, metallurgical, textile, food, pharmaceuticals, papermaking, as well as environmental protection, municipal management, and water conservancy construction.

3. Which domestic manufacturer of vortex flowmeters is good?

Domestic manufacturers of vortex flowmeters include Xian Chuangjin Electronic Technology Co., Ltd., Guangzhou Shunyi Automation Equipment Co., Ltd., Beijing Jingbo Zhongyi Automation Equipment Co., Ltd., Chengdu Weier Instr

Biogas flowmeter manufacturer

1. What is a biogas flowmeter?

2. What is FIQ flow meter

3. Which domestic manufacturer of vortex flowmeters is good?

『SILVER Official Website SERVICE』