Product
ProductCurrent position > Product detail

displacement meter

『displacement meter|thermal flow meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Advantages and disadvantages of Smith scraper flowmeter

Smith scraper flowmeter (Positive Displacement RotaryVane Meter) is composed of a scraper measuring chamber and a double-layer shell under pressure, which can maintain the factory processing accuracy in working state and ensure that the product measurement accuracy does not change with environmental changes. The straight through shell and rotating scraper ensure a large drainage volume, and are widely used in inventory control and settlement of important trade occasions such as crude oil, finished oil, solvents, chemicals, paints, fertilizers, and food. Feature ■ Excellent accuracy - Following the Rotary Vane principle, with a specially designed instrument measuring chamber, the pressure difference between the inlet and outlet is minimized across the measuring chamber, and the medium flow is optimized through the instrument, ensuring instrument accuracy. Extremely low pushing pressure - The latest flow path design provides extremely low pushing pressure. ■ Extremely high instrument repeatability - instrument repeatability reaches 0.05%. ■ Extremely long service life - The instrument adopts low friction ball bearings and a fixed path cam bracket, which enables the scraper to operate accurately according to the predetermined trajectory, ensuring long-term service life.

2. How to translate the unit of conductivity (dS/m)? How to translate (dS/m)?

If the displacement Siemens/meter is wrong, dont blame me.

3. ANSYS Workbench Beam Shell Structure Spectral Analysis (I) Beam Shell Modeling

Spectral analysis is a method of calculating the response of a structure under various frequency transient excitations.

. This analysis invo
displacement meter|thermal flow meter
lves excitations such as earthquakes and aircraft noise. This article takes the beam shell structure as an example to provide a detailed introduction to the spectral analysis method of ANSYS Workbench. When the aspect ratio of the structure exceeds 10, the stress along the length direction becomes the main analysis object, and the cross-section remains unchanged. At this time, beam elements can be applied. In ANSYS Workbench, Timoshenko beam elements are used by default, including Beam188 elements without intermediate nodes and Beam189 elements with intermediate nodes. The shell elements include Shell181 elements without intermediate nodes and Shell281 elements with intermediate nodes. The 3D model and related parameters of the beam shell structure used in this case are shown in the figure. The model framework is simulated using Beam188 elements, and the outer surface is simulated using Shell181 elements. The total weight of the structure is 1600kg, and the mass of other accessories is evenly distributed on the frame during analysis. The boundary conditions are 6 degrees of freedom (Remote Displacement) at the bottom of the 4 columns of the constraint framework. The detailed modeling process is as follows:

(1) There are multiple methods for modeling beam elements. In this case, the point → line method is used for modeling. A TXT document is created, named Point, and coordinates (in meters) are entered according to the relevant dimensions in the first section. The document content is shown in the figure. Open ANSYS Workbench, select Geometry, double-click the Geometry cell, and enter the Design Modeler (DM) program.

(2) Click on the menu bar 【 Point 】, set 【 Details of Point 】 → 【 Coordinates File 】=Import Po

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
[email protected]
+86 15365082610