Chengfeng Vortex Flow Meter

『Chengfeng Vortex Flow Meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Which is better for measuring the flow rate of diesel, vortex street or V-cone?

What flowmeter is better for measuring diesel or other oil media? For diesel with low viscosity, we recommend commonly used and cost-effective vortex flowmeters and turbine flowmeters. Zaizha code is suitable for some oils with high viscosity, such as engine oil. So can we use vortex flowmeter and turbine flowmeter? The answer is definitely no. Speaking of which, why does Chai Nian have such advantages when using a vortex flowmeter for diesel? Here, we need to analyze the characteristics of the vortex flowmeter. Only in its features can you find the advantages of the vortex flowmeter and feel why we recommend using it for measuring diesel. The principle of vortex flowmeter is based on the principle of Karman vortex street. In terms of structural construction, it is a vortex generator inside the pipeline. The fluid passes through the vortex generator to generate Karman vortex, and the instantaneous frequency of the fluid is calculated by the sensor. The cost of vortex flowmeter is relatively cheaper than other flowmeters. The vortex flowmeter also has some outstanding characteristics in terms of usage:

1. The volumetric flow rate is not affected by thermal parameters such as temperature, pressure, density, or viscosity of the measured fluid.

2、 No movable parts, simple measuring element structure, reliable performance, long service life

3. High accuracy, repeatability of 0.5%, and low maintenance.

4、 Can measure the flow rate of liquids, gases, or vapors

5. Generally does not require separate calibration

6. Wide measurement range. The range ratio can generally reach 1:10

7. The pressur

e loss caused is small. The LUGB vortex flowmeter produced by Chengfeng Company is based on the Kalman vortex street principle, mainly manifested by setting a non streamlined vortex generator (blocking fluid) in the flowing fluid, and alternately generating two columns of regular vortices from both sides of the vortex generator. Widely applicable to the measurement and control of superheated steam, saturated steam, compressed air, general gases, water, and liquids in industries such as petroleum, chemical, metallurgical, thermal, textile, and papermaking.

2. How to maintain the turbine flowmeter?

When maintaining a turbine flowmeter, the following points should be noted:

1. When using, the measured medium should be kept clean and free of impurities such as fibers and particles.

2. When starting to use the turbine flow sensor, the sensor should be slowly filled with medium before opening the outlet valve (which should be installed at the back of the flowmeter). It is strictly prohibited for the sensor to be impacted by high-speed fluid when it is in a state of no medium.

. The maintenance cycle for turbine flow sensors is generally six months. During maintenance and cleaning, please be careful not to damage the parts inside the measuring chamber, especially the impeller. Please pay attention to the position relationship between the guide components and the impeller during assembly. When the turbine flow sensor is not in use, the internal medium should be cleaned, dried, and protective covers should be added at both ends of the sensor to prevent dust and dirt from entering, and then stored in a dry place.

5. The matched filter should be cleaned regularly. When not in use, the int

1. Which is better for measuring the flow rate of diesel, vortex street or V-cone?

2. How to maintain the turbine flowmeter?

『SILVER Official Website SERVICE』